This article will provide information from the PEPFAR/MoH Data Alignment Webinar/Virtual Training Series. Following each webinar/virtual training, a full recording of the webinar and any associated slides will be posted here.
For any country-specific issues raised during the webinar/virtual training series, we request that you reach out immediately with a DATIM Support ticket so that we may begin to work toward resolving it especially given the tight timelines coming up this month.
Webinar 1: Introduction, Process Overview, and Preparation
May 16th, 2018
Access recording here: https://pepfar.adobeconnect.com/pihypvrwair2/
Webinar/Virtual Training 2: Inclusion of MoH, Process Overview, and Indicator Mapping
June 6th, 2018
Access recording here: https://pepfar.adobeconnect.com/pc2g1yj6kf0e/
Webinar/Virtual Training 3: Indicator Mapping Review & MoH Results ETL Processing
June 20th, 2018
Access recording here: https://pepfar.adobeconnect.com/plik592psxup/
Webinar 4: Open Forum/Q&A
July 11th, 2018
Access recording here: https://pepfar.adobeconnect.com/pqjssrnaboxc/
Webinar 5: Intro to Data Exchange
July 18th, 2018
Access recording here: https://pepfar.adobeconnect.com/pttxxukuc156/
Webinar/Virtual Training 6: Facility Reconciliation
July 25th, 2018
Access recording here: https://pepfar.adobeconnect.com/prmznwc1oxgh/
Webinar/Virtual Training 7: Data Approval and Workshop Preparation
August 8th, 2018
Access recording here: https://pepfar.adobeconnect.com/ppuf59udxa2i/
Webinar/Virtual Training 8: Managing Facilities, Maintaining Harmonization within DATIM + General Q & A
October 24, 2018
Access recording here: https://pepfar.adobeconnect.com/pjtsf4nwda8a/
Webinar/Virtual Training 9: Data Review and Analysis
November 28, 2018
Access recordings here:
- Part One provides information for performing data review in DATIM, including information on 2018 activity status, review window, and data review in GeoAlign, and can be accessed from this link: https://pepfar.adobeconnect.com/pidctod25ed4/.
- Part Two reviews important information regarding data analysis in DATIM and POART requirements, and can be accessed from this link: https://pepfar.adobeconnect.com/pwk6zv6ndsl1/.